Wood pallet block machine uses sawdust, wood shavings, etc. as raw materials, is dried by a dryer, and then mixed with glue to form woodblocks. This kind of compressed wood block is beautiful and clean and does not drop slag. These sawdust pallet blocks have good water resistance and strong nailing force. Commercial wood pallet block making machines are often used in wood processing plants, and the processed finished products are mainly used to make foot blocks of various wooden pallets.
What is the sawdust wood pallet block?
Wood blocks are the most common part of wooden pallets, mainly as their feet. The compressed sawdust blocks made by the wood pallet block extruder machine are different from common wood blocks nailed together with wooden boards. This kind of sawdust pallet blocks are smooth on all sides and high in strength, which can replace solid wood foot piers. Because this kind of wood blocks are fumigation-free, they are mainly used for export fumigation-free pallets and packing boxes at home and abroad.
Pallet blocks with holes VS non-holes pallet blocks
When pallet blocks with holes are produced, methanol and water vapor can be discharged in the central longitudinal hole. Therefore, the wooden cubes have good air permeability and are not easy to expand due to moisture and reduce their service life. But because of this hole, we need to avoid the small round hole in the middle when nailing the blocks, otherwise the nail will be driven into the middle hole by accident.
The non-porous pallet blocks are completely dense, with no holes in the middle. Such wood blocks are more convenient to nail. In fact, whether wooden blocks need to have holes or no holes is mainly determined by the density requirements of users. Of course, the higher the density of wood cubes, the better its load-bearing capacity.
Raw materials for making sawdust wooden blocks
There are many raw materials used to process wooden pallet blocks, usually various waste biomass materials. Most branches, sawdust, wood processing leftovers, wood shavings, rice husks, straw, pine, hardwood, logs, etc. can be used to process wooden blocks. These raw materials need to be made into sawdust using a wood shredder before processing sawdust pallet blocks.
Introduction of the wood pallet block machine
The wood pallet block machine is the main equipment for processing wooden cubes and tiles. The equipment usually has two reverse feed inlets for holding sawdust. In addition, the wood blocks making machine has four outlets, which are mainly for extruding pallet blocks.
The sawdust pallet blocks making machine has the function of electric heating. The heating plate is continuously heated during the extrusion of wood blocks so that the lignin in the sawdust is heated to melt and adhere to each other. The pallet blocks made in this way will be more solid and denser. The export mold of the wood pallet block machine can be replaced with molds of different sizes, so the equipment can produce wooden blocks of different specifications.
Parameters of wood pallet block making machine
| 모델 | Power | Capacity | 차원 | Weight |
| SL-75/2 | 15KW | 3.5m³/d | 75*75*1200mm | 1500kg |
| SL-90/2 | 15KW | 4m³/d | 90*90*1200mm | 1800kg |
| SL-100/2 | 18KW | 5m³/d | 100*100*1200mm | 2000kg |
| SL-120 | 15KW | 3.5m³/d | 100*120*1200mm | 1500kg |
| SL-145 | 18KW | 3.5m³/d | 145*145*1200mm | 1800kg |
How to make pallet blocks with the wood pallet block machine?
First, we need to mix the sawdust with glue. The commonly used glue is urea-formaldehyde resin glue with a content of about 16%. We can use a special mixer to mix sawdust or wood shavings. Then, we evenly add the well-stirred raw materials into the feed port of the wood pallet block machine.
The inner screw of the Pallet blocks making machine and its hydraulic system will continue to push the material into the heating system of its discharge. The manufacturer of pallet blocks usually installs a cutting device at the discharge port of the sawdust pallet blocks making machine. After the wood blocks are extruded, we can use the cutting device to cut the wood blocks to a certain length.
Wood pallet block machine video
Common processing sizes of wood pallet blocks
The length of pallet blocks processed by a commercial wood pallet block machine is usually 1200mm. There are usually many cross-sectional dimensions, mainly determined by different molding dies. Common sizes that can be processed are 75*75mm, 80*80mm, 90*90mm, 90*120mm, 100*100mm, 100*120mm, 100*140mm, 100*150mm, 140*140mm, etc. We can also customize the size of pallet blocks according to customer needs.
Wood pallet blocks production line
For customers who need a complete set of pallet blocks processing equipment, we can provide a complete sawdust wood pallet blocks production program, namely the wood pallet blocks production line. Wood pallet blocks processing line is composed of a series of processing equipment, mainly including hammer mill, sawdust dryer, automatic mixer, wood pallet block machine, and pallet blocks cutting machine.
Sawdust pallet block machine shipped to Indonesia
The industrial sawdust pallet block machine can squeeze rice husks, sawdust, and other raw materials into cubes under high temperature and high-pressure conditions. These sawdust pallet blocks can be further processed into wooden pallet feet.
One of our Indonesian customers ordered a complete set of sawdust pallet block machines from our factory, including a glue mixing machine, pallet block press machine, and pallet blocks cutting machine. The Indonesian customer processed sawdust pallet blocks mainly for selling to specializing in the production of wooden pallets. factory.
