工厂大量生产家禽饲料颗粒需要一整套的加工流程，包括原料破碎与干燥、饲料成型和成品冷却。
用颗粒饲料喂养家禽的优点
Pellet feed machine is widely used in the feed processing industry and breeding industry with its many advantages. The pellet feed produced by the poultry feed pellets making machine has a higher density and lower water content, which is convenient for transportation and storage.
同时，由于颗粒饲料已经混合了各种营养成分，每个饲料颗粒都含有养殖动物所需的全部营养，也避免了传统养殖方式中繁琐的喂养不同食物的程序。同时，这种营养丰富的颗粒饲料也让一些挑食的动物获得全面的营养。
制作家禽饲料颗粒的加工流程
原料破碎
在制粒之前，原料破碎是家禽饲料颗粒不可或缺的操作。只有经过饲料厂破碎的物料，才能由颗粒机加工。一般来说，物料的破碎尺寸与压缩饲料颗粒的直径有关。
Usually, how large the diameter of the particles is to be produced, then the particle size of the raw material is also this number. For example, if your feed particle diameter requirement is 5mm, then the material needs to be crushed below 5mm. The poultry feed pellet machine manufacturer recommends that the user can crush the material below 6mm, which is suitable for all types of poultry feed pellet production.
原料的水分需要保持在大约13%
许多人不知道在使用牛羊草料饲料颗粒机之前应控制原料的水分含量。家禽颗粒饲料机的干湿度要求严格，意味着对原料的水分有严格的要求。我们建议用户将原料的水分保持在大约13%。在造粒之前，如果原料较湿，则需要先进行干燥。
在造粒过程中，需要以均匀的速度喂料
Whether the 家禽饲料颗粒机 feeds at a uniform speed is related to whether the pellet machine can work normally. If the feeding is too fast, it is easy to cause the material to overflow the discharge port of the feed pellet machine. If the feeding is too slow, it is easy to cause the pellet machine to run empty. Therefore, the feeding speed should be maintained at a constant speed, which can ensure the normal operation of the poultry feed pellet machine and improve the working efficiency of the pellet machine
