使用一段时间后，机械产品会因操作不当和自身磨损而出现故障，木材粉碎机也不例外。那么在使用木材粉碎机时会遇到哪些故障？我该如何解决？
舒利电动木材粉碎机的特点
There are many types and models of electric wood shredders produced by Shuliy Machinery. Customers can choose the appropriate model according to the output and other needs. Working principle of electric wood pulverizer: The material enters the machine’s pulverization chamber for pulverization. At this time, there will be continuous friction between the material and the material, and between the material and the hammer, so that the material is quickly crushed into debris.
木材粉碎机的故障有哪些？
1. Reasons for the failure of the back injection of the feed port:
①The damper is adjusted improperly, the pipeline is blocked, or the screen hole is blocked.
② The air permeability of the dust collector bag is poor, or the length is not enough.
解决方案:
① Adjust the opening of the damper or remove the blockages in the pipes and screen holes. Makes the wood crusher discharge smoothly.
② Use a dust collector bag with better air permeability, the length should be greater than 1.5 meters.
2. Reasons for the failure of bearing heating:
①The bearing lacks lubricating oil.
②The bearing is damaged or bent.
③The rotor is unbalanced.
④The motor shaft and the wood shredder shaft are not on the same plane.
解决方案:
① Add or replace lubricant.
②Replace the bearing or main shaft of the wood shredder.
③ Perform a balance test on the rotor.
④Adjust the main shaft of the motor and the main shaft of the 木材破碎机 so that the cut surfaces of the two main shafts are in the same plane.
3. The reason for the noise in the crushing cavity of the wood crusher:
①Parts in the wood shredder fall off, or the distance between the hammer and the screen surface is too short, causing the hammer to make a noise when it touches the screen surface.
②A foreign object has fallen into the crusher.
解决方案:
Stop the machine, open the cover, and check the distance between the hammer and the screen. If it is too close, adjust the distance. If there is any foreign object, remove the foreign object.
使用电动木材粉碎机时，如何正确操作？
1. 连接开关电源后，木材粉碎机应检查其是否正常旋转。
2. In the process of using the electric wood pulverizer, if you find that the bolt mouth is damaged, you should first disassemble it to prevent damage to the spindle nut. Do not change the driving force and speed at will in the application of wood shredder.
3. 安装刀片时，必须根据规格准确定位每个刀片的安装位置，以保持长度一致。
4. If you find that the crushing particle size of the equipment is not ideal, you can remove the blade and use an electric wood crusher to grind and polish, which can maintain the sharpness of the blade.
5. 使用木材粉碎机时，物料应以均匀的速度喂入，防止设备卡住。此外，喂料时应防止石头、钢钉等金属材料带入设备，以免损坏刀片。
