Commercial wood crusher machine used to make high-quality sawdust are usually very productive, with a processing capacity of up to 5 tons per hour. Continuous production for a long time will cause a certain degree of damage to the wood crushers.
But if the user pays attention to the daily maintenance of the wood crusher machines, then the machine can bring greater economic benefits to the users. The daily maintenance of the wood shredder mainly includes the maintenance of bearings and the replacement of screens.
木材破碎机的轴承维护
当木材粉碎机长时间使用时，轴承会过热，影响机器的正常生产或引发安全隐患。因此，用户应及时维护木材粉碎机。
木材破碎机轴承发热的原因及解决方案
1. 当移动式木材粉碎机的两个轴承座不平衡，或电机转子与粉碎机转子不同心时，机器的轴承会受到额外负荷，导致过热。如果发生这种情况，应立即停止使用木材破碎机并进行故障排除，以避免轴承损坏。
2. 木材粉碎机的轴承盖与轴的配合过紧、过紧或过松，都会导致轴承过热。当出现这种现象时，设备会发出摩擦声和明显的晃动。这时，用户应停止使用木材破碎机，拆除轴承，修整摩擦部件，然后按要求重新组装。
3. Too much, too little, or aging oil in the bearings of the 木材粉碎机 is also the main cause of bearing damage due to overheating. Therefore, the user should refill the lubricant quantitatively on time according to the requirements of the instruction manual. General lubrication accounts for 70% -80% of the bearing space, too much or too little is not conducive to bearing lubrication and heat transfer.
木材破碎机的筛网更换
木材粉碎机的筛网在整个工作过程中起到筛选和过滤材料的作用。同时，筛网也是易磨损的木材破碎机的一部分。客户需要在一定时间后更换筛网，以确保设备的正常运行。
筛网更换方法
1. In the first step, first lay the screen of the 木材破碎机 on the lower press ring of the machine, and then stretch the screen on the lower press ring with a tight ring, taking care not to pull the net too tight.
2. 在第二步中，用螺栓将下压筛环和筛网与上压筛环一起固定。注意螺栓要对称且均匀受力。
3. 第三步是锁紧并加固筛体，然后转动木材粉碎机的转子，观察刀片与筛网之间的间隙是否合适。
